How to Flash Stock ROM By SP Flash Tool from PC?

                                      
Required Items: -)
1:) Stcok ROM in your PC according to your SW version

2:) SP flash Tool [click HERE ]

3:) Drivers installed in your PC


CDC Drivers HERE

ADB Drivers HERE

VCOM Drivers HERE

4:) Micromac Canvas Fire 2

5:) USB Data Cable


Procedure: -)
1:) Install CDC or VCOM in your PC properly.


2:) Extract the zip file of SP Flash Tool that you had downloaded from above link and place the flash tool in the stock ROM folder and delete the old flash tool given in the ROM and open the New SP Flash Tool.


3:)  Now click on scatter then select MT6582_Android_scatter_emmc.txt
file from firmware folder.
                      
4:)  Now turn off your phone and remove your phone's battery[ Don't conect with PC] and click on download.

5:) Now connect your phone to pc with Data Cable... Now The process will start and a red progress bar will appear....

                  
 5:) After completing red bar, There will purple progress bar....
                     
                    
                     
                     
                      
6:)Right after the purple progress bar is complete, A message will appear: -- "Please insert USB cable in x seconds" And then downoad will atart away and you will seea yellow progress bar starting.
                      
7:) After the yellow progress bar finished you will get a popup message with green circle which means downloading completed. 


8:) Now you can remove your A104 safely and turn it on. 

Note: -)  ~You can try these steps with any other android phone but i m not sure for the deivers[CDC and VCOM] 😉
You have to use stock ROM according to your phone not given in above link [If  you are uing other than MMX A104]

You have to be sure that you had installed drivers properly and removed phone's battery before connecting to pc. 

 Video tutorial is   HERE


Thanks......



Written by Hemant Sachdeva 

Comments

Post a Comment

Popular posts from this blog

How to install Kali Linux on Android?

Requirements :-) 1:- ROOTED DEVICE 2:- LINUX DEPLOY APP(LINK GIVEN BELOW) 3:- VNC VIEWER FOR ANDROID (LINK GIVEN BELOW) 4:-SUFFICIENT SPACE ON YOUR DEVICE (MORE THEN 1.5 GB) 5:- PATIENCE ☺ Procedure:-) 1:- FIRST of all , Open Linux Deploy app (downloaded from given link) and then open its properties (from the bottom right corner ) now scroll down and choose Kali Linux in distributions. 2:- If u have any error when creating image change the installation path to /emulated/legacy instead of /emulated/0 3:- Now hit INSTALLLLLLL        [THIS WILL TAKE A LOT OF TIME  BE PATIENT AND ENSURE U HAVE SUFFICIENT STORAGE] 4:- After installation hit START. 5:- Now open VNC VIEWER app and add a new Connection             ADRESS:    =  localhost             NAME:       =   Kali                 ...
Read more

Philz+TWRP+Stock+CWM Recovery For Micromax Canvas Fire 2

From Here You Can Download Philz + TWRP + Stock Recovery's [Only for ROOT users] Here are the steps..... 1:-)First download the Recovery from this link Phillz Recovery 2:-)Now download an app named RAR from this link RAR - Apk 3:-)Now open the app and extract the zip file you have downloaded. A file named recovery . img will be extracted from the zip 4:-)Download one more app named FLASHIFY from the link given below Flashify - Apk 5:-)Now open the app Flashify then grant root permission and always select allow option whenever it will ask. 6:-)Then chose Recovery. 7:-)Then select Choose A file . 8:-)Then select recovery . img from Sd card where you have extracted the philz recovery 9:-)Then the app will start flashing the recovery . img. 10:-)After flashing reboot the device then you will automatically reboot to Philz Recovery. Then touch on reboot system and chose do not disable flashing. Congratulations you have changed you Recovery Mode to Philz Recov...
Read more

How to unlock your phone if you forget your unlock password?

      Here are two methods for root users and unroot users both          Method#1 for Root Users  REQUIRED ITEMS :-)  1:) Rooted Device(Not for 2nd method) 2:) Custom Recovery Installed (How to install? link given below) 3:) Zip files given below  4:) A little bit mind Procedure:-) 1:) Power Off Your Phone and boot into recovery mode(by pressing and holding power and Volume+ buttons) 2:)Now go to install zip and locate the downloaded zip file from given links. 3:) Now flash the zip files.(According to the type of password that u forgotten) 4:) Now after flashing zip reboot your system. 5:)  Now if u flashed       i) Pin unlock - your pin is "12345"       ii) Alphabet/Name - type "Gagan"       iii) Pattern - then do "Z"  6:) Now Rock..... Method#2 For unrooted devices:-)  You will loss your data in your device bu...
Read more